 |
A/AWT
The A / AWT range combines the qualities of a robust electric motor and a well proven simple mechanical drive. Total environmental sealing to IP68 allows the inclusion of integral motor starter and control electronics.
Torque range 14 to 3,000 Nm (10 to 2,200 Ibf-ft) direct drive, up to 250,000 Nm (185,000 Ibf-ft) quarter-turn and up to 40,800 Nm (30,000 Ibf-ft) multi-turn.
Oil bath lubricated IP68 double-sealed option.
Complete integral motor control or customer supplied motor control.
Isolating and regulating duty.
Separate motor control available where required (syncroset actuator).
|
 |
IQ
Provides intelligent communication options and a multilingual display. The IQ range offers multi- and quarter-turn isolating/regulating duty.
Torque range 14 to 3,000 Nm (10 to 2,200 Ibf-ft) direct drive (multi-turn only). Higher torques when combined with IS or IB gearbox, up to 40,800 Nm (30,000 Ibf-ft). Quarter-turn when combined with IW gearbox up to 250,000 Nm (185,000 Ibf-ft).
Complete integrated motor control.
Simple non-intrusive, infra-red setup and adjustment.
Digital, analogue or bus system remote control and status reporting.
Comprehensive software tools for plant records and valve performance analysis.
|
 |
IQT
For quarter-turn applications the IQT is designed for direct drive, and can be mounted at any operating angle. The rugged construction is double-sealed to prevent water and dust ingress even during site wiring.
Torque range 50 to 2,000 Nm (36 to 1,475 Ibf-ft).
Available for three-phase, single-phase or DC supplies.
Variable output speed.
Multiport controller option.
Secure self-locking output for butterfly valve and dampers without the use of additional brakes.
|
 |
NA
Rotork NA range actuators have been qualified for safety related duty in nuclear reactor installations. The qualification is in accordance with US standard IEEE 382, 1980.
Rotork type NA actuators have been manufactured in strict accordance with the latest quality procedures for use in nuclear environments.
· Total environmental sealing.
· Designed for active and passive duty.
· Torque limiter brake options.
· Thrust compensator options.
· Inside and outside containment capability.
|
 |
Q
The Q range is a single-phase quarter-turn direct drive electric actuator available in two versions, both environmentally sealed to IP68. Q standard for simple open/close duties where on/off control is required and the Q Pak which incorporates a specially designed control interface module enabling operation from a variety of remote control signals.
Torque range 30 to 406 Nm (22 to 300 Ibf-ft).
Rugged compact, double-sealed.
Positive travel limitation through externally adjustable mechanical stops.
Marine option.
Simple remote control for basic applications.
|
 |
ROM
Building on the simple specification of the ROM / RBM range, Rotork now offer a more complete control solution with the introduction of the new ROMpak.
ROMpak introduces: Local controls for ease of operation; Dual local indicators - mechanical and LED; Phase rotation correction for ease of installation; Options including: bluetooth non-intrusive configuration, bus communication and Folomatic/ CPT, datalogger.
Torque range 35 to 650 Nm (25 to 480 Ibf-ft).
Efficient yet simple gearing.
Wide range of supply voltages available.
Single-phase, three-phase and DC options.
Modulating option.
Watertight IP67 rating. |
 |
6000
From 90° to 313° rotation.
Torque range up to 35,256 Nm (26,000 Ibf-ft).
Double 'O' ring sealing.
Continuous unrestricted modulating duty.
HART, Profibus and Foundation Fieldbus available.
Temperature range from -40°C to 85°C (-40°F to 185°F).
Automatic torque limiting.
Self-locking drive system to hold in last position and prevent backdriving.
Manual override standard.
|
 |
2000
Stroke distance from 6" to 24" (152mm to 610mm).
Thrust range up to 7,117 N (1,600 Ibf).
Modulating duty (2000 starts per hour).
HART available.
Temperature range from -40°C to 65°C (-40°F to 150°F).
Automatic thrust limiting.
Self-locking drive system to hold in last position and prevent backdriving up to thrust rating.
Manual override standard.
|
 |
1000
· Rotary: Rotation from 10° to 20 turns.
· Rotary: Torque range up to 40 Nm (350 lbf-in).
· Linear: Stroke distance up to 38.1 mm (1.5").
· Linear: Thrust range up to 4003 N (900 Ibf).
· Continuous unrestricted modulating duty.
· Temperature range from -40°C to 65°C (-40°F to 150°F).
· Automatic torque and thrust limiting available.
· Self-locking drive system to hold in last position and prevent backdriving.
Manual override standard.
|
 |
GPSA
· Rotary: Rotation 90° to 20 turns.
· Rotary: Torque range up to 14 Nm (125 lbf-in).
· Linear: Stroke distance up to 35mm (1.375").
· Linear: Thrust range up to 890 N (200 Ibf).
· Continuous unrestricted modulating duty.
· HART, Profibus and Foundation Fieldbus available.
· Temperature range from -20°C to 65°C (-4°F to 150°F).
· Automatic thrust limiting available.
· Self-locking drive system to hold in last position and prevent backdriving up to thrust rating.
Manual override standard.
|
 |
CVA
The CVA range of linear and quarter-turn actuators provides an electrically powered process control operator suitable for most control valve types and sizes. The CVA sets a new standard for process control valve actuators.
Electrically powered.
High performance, continuous unrestricted modulation duty - S9.
High resolution and repeatability.
Comparable life to pneumatic operators.
Optional bus interfaces available.
Comprehensive datalogging.
Watertight IP68 and explosionproof enclosures.
Programmable fail-to-position option.
Separate, double sealed terminal compartment.
'Intrinsically Safe' control & instrumentation compatible.
Non-intrusive setup/calibration using Bluetooth.
Optional manual override.
Available in both Quarter-turn and Linear configurations. |
If you need more additonal information about our services or merchandise-please contact us:
Phone.: +370 37 209497, Fax.: +370 37 207414, e-mail: agava@agava.lt
